Envirotrim

EnviroTRIM™ is a line of lightweight Interior / Exterior Expanded Poly-Styrene moldings that eliminates any need for nailing and or screwing. All of our designs are made using a cementitious base coat and depending on applications a smooth cementitious or plaster finish. EnviroTRIM™ is a very environmentally friendly product that eliminates the use of wood and contains no CFC's or HCFC's.

Exterior
Mouldings

Installation Guidelines

1.	Starting from on e corner, cut the miters.

2.	Apply adhesive to the bottom and top inside edges using a gypsum base adhesive.

3.	Press the moulding into ceiling corner and clean the joint using a damp sponge.

4.	When joining the mouldings, apply a generous amount of adhesive to one side of the adjoining piece. Using a flexible putty knife, even out the joint (a second coat may be required). Using a sanding sponge, sand joint, smooth then paint.

Interior
Mouldings

V I E W T H E EnviroTRIM™ C A T A L O G !
Click a category below to view.

top of page

continue tour